0 Items
Home  > Commercial Steel Welded Frames

Commercial Steel Welded Frames

Item #: CMDISP WELD 
CMDISP WELD
Commercial Steel Welded Frames
  • 5 3/4 jamb depth
  • Existing wall anchors (can be used with either wood, steel stud or masonry walls)
  • Regular arm and Parallel arm closer reinforcements
  • Deadlock strike prep
  • 45 minute manufacturer embossed FRR label
  • 16 gauge galvanneal steel is fully welded across the visible side of both faces. Exposed welds are ground, finished and prime painted. Each frame will have two spreader bars tack welded in place. The spreader bars are used to square the frame and keep it stable during shipping to site.
  • Galvanneal steel is matte grey and ready for the finish paint - primer is not required
  • Throat size should match wall thickness. It is common for throat sizes to exceed wall thickness by 1/8". Caulking is used to fill any additional spacing.

    • SPECIAL ORDER

    Sizes: Single Doors (3-hinge): 2/0, 2/4, 2/6, 2/8, 2/10, 3/0; (4-hinge): 3/4, 3/6, 3/8, 4/0 x 6/8 or 7/0. Double Doors (3-hinge): 4/0, 4/8, 5/0, 6/0; (4-hinge): 6/8, 7/0, 7/4, 8/0 x 6/8 or 7/0.

    Frame Material: 14, 16 or 18 gauge galvanneal steel, zinc coated to ASTM A653 ZF001(A01).

    Rough Opening Size Requirements: 
    3/0 x 6/8 = 40-1/4" x 82-1/8"
    3/0 x 7/0 = 40-1/4" x 86-1/8"