View:

Pemko 18100 NB Door Bottom Sweep

with Nylon Brush Insert
Pemko 18100_NB Door Bottom Sweep with Nylon Brush Insert

• All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes
• Brush remains flexible down to -40F and has a melting point above 400F
• UV stabilized, dependable, long-lasting, cost-effective
• 36" or 48" length (full-length, field-cut to size) 
• Fire rated and smoke tested

Ratings
• BHMA Certified
• Smoke Tested - UL1784
• Fire Rated - UL10C - Positive Pressure
• Underwriters Laboratory 4L 10
• Greenguard Gold Certified
Item#:
PEMKO 18100
You must be logged in to order this item. Log in here

Pemko 315 CN Door Bottom Sweep

Surface Applied - Rubber Sweep
Pemko 315CN Door Bottom Sweep
Surface Applied - Rubber Sweep

The Pemko 315 door sweep with EPDM insert is applied to the bottom face surface of a door to prevent air, sound, smoke, insects, rodents, and water from entering a room. Commonly used on the exterior of outswing doors in conjunction with a saddle threshold.

• Width: 1/4" (6.4mm)
• Profile Height: 1-1/4" (31.8mm) 
• Total Height with Insert: 1-11/16" (42.9mm)
• For commercial doors of all types
• Seals against smoke, fire, air, sound, and weather
• 36" or 48" length (full-length, field-cut to size)
 
Item#:
PEMKO 315
You must be logged in to order this item. Log in here

Draftseal DS138C-2 Door Bottom Sweep

Surface Applied - Rubber Sweep
Draftseal DS138C-2 Door Bottom Sweep
Surface Applied
Rubber Sweep

DS138C Extruded aluminum clear anodized with rubber insert, black, 1/8" x 1-3/8" (3.2mm x 35mm)

Door bottom sweep is supplied with punched holes and screws and is only available in the following NET lengths: 36" (914mm), 48" (1219mm), 84" (2134mm, 96" (2438mm)
Item#:
DRAFTSEAL DS138C
You must be logged in to order this item. Log in here
Item#:
DRAFTSEAL RAIN CAP
You must be logged in to order this item. Log in here
View: